制造商：BURKARD，英國 布卡德PDE0009

儀器用途

該儀器由電子控制的低電壓微量施藥器。使用英國Burkard 1毫升全玻璃注射器時，點滴量可在1至100微升內調整。而同類其它注射器只可提供10倍量。全金屬結構，適合于長期高精度分發?？捎弥篙喛旖莸剡x擇分發量，每次增加0.1 μl，一次至大的分發量可以達到999μl。廣泛應用于實驗室研究及化學液體定量滴定工作上。

產品特點

-此器械組合與電腦兼容，

-可通過腳動、手動或遙控開關來操作

-注射器設計為雙向式迅速移動

-**裝置可以避免儀器在使用中損壞

儀器組成

-該儀器由控制單元和注射單元組成

-10cc全玻璃注射器

-腳踏開關

-圓環形或指動開關

-遠程控制插座

技術指標

1ml注射器至大施藥量	500μl
控制單元尺寸（W×D×H）	115×332×140mm
注射單元尺寸（W×D×H）	106×300×106mm
總重	1.47kg
電壓	240V 50Hz或110V 60Hz

Additional information

Product Description

The Burkard 900X offers very high precision dispensing with a mean accuracy of 0.4% using gas-tight syringes. The error is reduced with larger volumes. Volumes of 0.1 microlitre increments can easily be set on the thumbwheel switch and a single delivery can be increased up to 999 microlitres. Two syringes cover the entire range of aliquot volumes – 1 ml and 10 ml glass syringes, with luer fitting.

The 900X is designed to overcome the inherent problems of dispensers utilising electronic linear motors. A low voltage fully electronic unit, computer compatible, which can be operated from foot, hand or remote switching, making it completely safe with hazardous materials. Rapid traverse is available in both directions and safety devices are fitted to avoid damage to the mechanism during use.

Construction and Equipment Details

Robustly built for long-term high precision dispensing. The syringe driver utilises an independent precision ball carriage and motor unit avoiding the use of a linear stepping device. With this arrangement correct alignment is maintained and ensured accuracy over long periods.

The following equipment is supplied as standard:

• Foot switch with simple plug-in connector
• Ring or finger switch with plug-in connector
• Socket on syringe unit for remote control

Extra Equipment

10ml all-glass syringe complete with stainless steel mounting sleeve.